5961-01-506-5885 SEMICONDUCTOR DEVICE,DIODE Index 6210-01-506-5887 LIGHT,INDICATOR

National Stock Number:
5306-01-506-5886

Federal Supply Class:
5306

National Item Identification Number:
015065886

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
BACB30LJ10DU3781205THE BOEING COMPANY
NAS6310U37D80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.909 INCHES MINIMUM AND 2.959 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH2.924 INCHES MINIMUM AND 2.955 INCHES MAXIMUM
GRIP DIAMETER0.6235 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH2.303 INCHES MINIMUM AND 2.323 INCHES MAXIMUM
HEAD HEIGHT0.312 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
HEAD STYLEUNDERCUT HEXAGON
HOLE DIAMETER0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
PART NAME ASSIGNED BY CONTROLLING AGENCYBOLT,TENSION,HEX HEAD,CLOSE TOLERANCE,A286 CRES,SHORT THREAD, REDUCED MAJOR THREAD DIA.,SELF-LOCKING AND NONLOCKING,160 KSI FTU
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5731 ASSN STD SINGLE MATERIAL RESPONSE AND AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALIRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.625 INCHES
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.637 INCHES MINIMUM
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH18


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us