5306-01-513-3351, BOLT,SHEAR

2090-01-513-3352 MODIFICATION KIT,MISCELLANEOUS S

National Stock Number:
5306-01-513-3351

Federal Supply Class:
5306

National Item Identification Number:
015133351

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

84725-7-11	56878	SPS TECHNOLOGIES, LLC
AIC578-7-11	06725	SPS TECHNOLOGIES, LLC
VCC0090-7-11	06710	VALLEY-TODECO, INC.
GB511GF7-11	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
PBF1478-7-11	27624	SPS TECHNOLOGIES LLC

Techincal Specification:

EXTENDED WASHER DIAMETER	0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.089 INCHES MINIMUM AND 0.109 INCHES MAXIMUM
FASTENER LENGTH	1.337 INCHES MINIMUM AND 1.367 INCHES MAXIMUM
GRIP DIAMETER	0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH	0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.425 INCHES MINIMUM AND 0.445 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
NOMINAL THREAD DIAMETER	0.438 INCHES
SPECIFICATION/STANDARD DATA	26512-GB11GF7 MANUFACTURERS STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.640 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	20
WIDTH BETWEEN FLATS	0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM

Click here to Register for Free 30-day Trial