5306-01-513-4619, BOLT,SHEAR

5935-01-513-4620 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5306-01-513-4619

Federal Supply Class:
5306

National Item Identification Number:
015134619

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

GB511GF8-24

26512

NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

EXTENDED WASHER THICKNESS	0.113 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
EXTENDED WASHER DIAMETER	0.818 INCHES MINIMUM AND 0.823 INCHES MAXIMUM
FASTENER LENGTH	2.246 INCHES MINIMUM AND 2.276 INCHES MAXIMUM
GRIP DIAMETER	0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH	1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
HEAD HEIGHT	0.494 INCHES MINIMUM AND 0.514 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.500 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
WIDTH BETWEEN FLATS	0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.736 INCHES MINIMUM AND 0.786 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	20

Click here to Register for Free 30-day Trial