|
|
|
National Stock Number:
5306-01-513-4895
Federal Supply Class:
5306
National Item Identification Number:
015134895
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| GB511GF7-10 | 06710 | VALLEY-TODECO, INC. | | GB511GF7-10 | 06725 | SPS TECHNOLOGIES, LLC | | GB511GF7-10 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GB511GF7-10 | 27624 | SPS TECHNOLOGIES LLC | | GB511GF7-10 | 56878 | SPS TECHNOLOGIES, LLC | | GB511GF7-10 | 80539 | SPS TECHNOLOGIES, LLC | | HPF6060-7-10 | 1VSL7 | HOUSTON PRECISION FASTENERS I LP | | GB511H | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| EXTENDED WASHER THICKNESS | 0.083 INCHES NOMINAL | | EXTENDED WASHER DIAMETER | 0.820 INCHES MINIMUM AND 0.830 INCHES MAXIMUM | | FASTENER LENGTH | 1.423 INCHES MINIMUM AND 1.453 INCHES MAXIMUM | | GRIP LENGTH | 0.788 INCHES MINIMUM AND 0.838 INCHES MAXIMUM | | GRIP DIAMETER | 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.464 INCHES NOMINAL | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.438 INCHES | | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.585 INCHES MINIMUM AND 0.665 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 20 |
|
|