4320-01-513-4985 PISTON,HYDRAULIC MOTOR-PUMP Index 5980-01-513-4987 LIGHT EMITTING DIODE

National Stock Number:
5306-01-513-4986

Federal Supply Class:
5306

National Item Identification Number:
015134986

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
GB511GF6-10426512NORTHROP GRUMMAN SYSTEMS CORPORATION


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER6.840 INCHES NOMINAL FIRST HOLE
EXTENDED WASHER THICKNESS0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM
EXTENDED WASHER DIAMETER0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM
FASTENER LENGTH7.045 INCHES MINIMUM AND 7.075 INCHES MAXIMUM
GRIP DIAMETER0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH6.490 INCHES MINIMUM AND 6.510 INCHES MAXIMUM
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON EXTENDED WASHER
MATERIALSTEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.375 INCHES
SHANK UNTHREADED HOLE DIAMETER0.101 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS0.491 INCHES NOMINAL
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3A
THREAD LENGTH0.535 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH24


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us