|
|
|
National Stock Number:
5306-01-513-9065
Federal Supply Class:
5306
National Item Identification Number:
015139065
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 11823-5D70 | 59563 | REID PRODUCTS INC. | | 122895-5D70 | 0PTK6 | SPS TECHNOLOGIES INC | | AIC687-5D70 | 06725 | SPS TECHNOLOGIES, LLC | | GS1015-5D70 | 1EM77 | B & B SPECIALTIES INC | | 122895-5D70 | 56878 | SPS TECHNOLOGIES, LLC | | 122895-5D70 | 80539 | SPS TECHNOLOGIES, LLC | | VCG0001-5D70 | 06710 | VALLEY-TODECO, INC. | | ST3M744-5D70 | 0ZC92 | HEARTLAND PRECISION FASTENERS INC | | SLB748-5D70 | 16258 | SPACE-LOK, INC. | | ST3M744-5D70 | 1VSL7 | HOUSTON PRECISION FASTENERS I LP | | PBF1265-5D70 | 27624 | SPS TECHNOLOGIES LLC | | ST3M744-5D70 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | ST3M744-5D70 | 76301 | THE BOEING COMPANY | | NAS655V70D | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | VS3174-5D70 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VS3174-5D70 | 17446 | HUCK INTERNATIONAL, INC | | WC744-5D70 | 60516 | WEST COAST AEROSPACE, INC. | | VS3174-5D70 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | AGAV | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 4.632 INCHES MINIMUM AND 4.770 INCHES MAXIMUM FASTENER | | FASTENER LENGTH | 4.740 INCHES MINIMUM AND 4.760 INCHES MAXIMUM | | GRIP DIAMETER | 0.484 INCHES MINIMUM AND 0.511 INCHES MAXIMUM | | GRIP LENGTH | 4.375 INCHES NOMINAL | | HEAD HEIGHT | 0.187 INCHES NOMINAL | | HEAD MINOR DIAMETER | 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-CLOSE TOLERANCE,SPLINE DRIVE,CRES (125 KSI FSU) DRILLED, SHORT THREAD | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NOMINAL THREAD DIAMETER | 0.313 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.375 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|