4010-01-526-0932 WIRE ROPE ASSEMBLY,SINGLE LEG Index 5998-01-526-0934 CIRCUIT CARD ASSEMBLY

National Stock Number:
5306-01-526-0933

Federal Supply Class:
5306

National Item Identification Number:
015260933

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
BACB30LM8CD3081205THE BOEING COMPANY


Techincal Specification:
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5737, A286 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALIRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
SHANK UNTHREADED HOLE DIAMETER0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35, TYPE II FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-C-320, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE GRIP
SURFACE TREATMENTPASSIVATE OVERALL
SURFACE TREATMENTCHROMIUM GRIP
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3A
THREAD LENGTH0.735 INCHES NOMINAL
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNJF
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.469 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH2.685 INCHES NOMINAL
GRIP DIAMETER0.4935 INCHES MINIMUM AND 0.4950 INCHES MAXIMUM
GRIP LENGTH1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
HEAD HEIGHT0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
HEAD STYLEHEXAGON
HOLE CONFIGURATION STYLEROUND
HOLE DIAMETER0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM
HOLE QUANTITY1
HOLE TYPEDRILLED
NOMINAL THREAD DIAMETER0.500 INCHES


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us