|
|
|
National Stock Number:
5306-01-552-4348
Federal Supply Class:
5306
National Item Identification Number:
015524348
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| TLH110-9-38 | 27624 | SPS TECHNOLOGIES LLC | | TLH110-9-38 | 59563 | REID PRODUCTS INC. |
|
Techincal Specification:
| FASTENER LENGTH | 2.818 INCHES MINIMUM AND 2.843 INCHES MAXIMUM | | GRIP DIAMETER | 0.4636 INCHES MINIMUM AND 0.5091 INCHES MAXIMUM | | GRIP LENGTH | 2.365 INCHES MINIMUM AND 2.380 INCHES MAXIMUM | | HEAD HEIGHT | 0.140 INCHES MAXIMUM | | HEAD DIAMETER | 1.018 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-TAPER, SHANK, SHEAR, 100 DEGREE HEAD TYPE, OVERSIZE | | NOMINAL THREAD DIAMETER | 0.8625 INCHES | | THREAD LENGTH | 2.225 INCHES MINIMUM AND 2.520 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 18 |
|
|