|
|
|
National Stock Number:
5306-01-598-9824
Federal Supply Class:
5306
National Item Identification Number:
015989824
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| NAS6607DH22 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NAS6607DH22 | A0126 | LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE |
|
Techincal Specification:
| FASTENER LENGTH | 2.069 INCHES NOMINAL | | GRIP DIAMETER | 0.436 INCHES MINIMUM AND 0.437 INCHES MAXIMUM | | GRIP LENGTH | 1.375 INCHES NOMINAL | | HEAD HEIGHT | 0.219 INCHES NOMINAL | | HEAD STYLE | HEXAGON | | HOLE CONFIGURATION STYLE | HEXAGON CORNERS | | HOLE DIAMETER | 0.106 INCHES NOMINAL | | HOLE QUANTITY | 6 | | HOLE TYPE | DRILLED | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.437 INCHES | | POINT DIAMETER | 0.426 INCHES MINIMUM AND 0.431 INCHES MAXIMUM | | POINT STYLE | FLAT | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.694 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 20 | | WIDTH BETWEEN FLATS | 0.678 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
|
|