|
|
|
National Stock Number:
5306-01-599-4554
Federal Supply Class:
5306
National Item Identification Number:
015994554
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 3M1277E5D6A | 06725 | SPS TECHNOLOGIES, LLC | | 3M1277E5D6A | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 3M1277E5D6A | 1EM77 | B & B SPECIALTIES INC | | 3M1277E5D6A | 27624 | SPS TECHNOLOGIES LLC | | 3M1277E5D6A | 56878 | SPS TECHNOLOGIES, LLC | | 3M1277E5D6A | 73197 | HI-SHEAR CORPORATION | | 3M1277E5D6A | 76301 | THE BOEING COMPANY | | 3M1277E5D6A | 80539 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.469 INCHES NOMINAL | | FASTENER LENGTH | 0.844 INCHES NOMINAL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-L-87132, TYPE 1, GRADE B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.4645 INCHES MINIMUM AND | | 0.4739 INCHES MAXIMUM | | COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | HOLE CONFIGURATION STYLE | ROUND | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | HOLE DIAMETER | 0.076 INCHES NOMINAL | | GRIP LENGTH | 0.375 INCHES NOMINAL | | GRIP DIAMETER | 0.3271 INCHES MINIMUM AND | | 0.3276 INCHES MAXIMUM |
|
|