| MATERIAL | STEEL COMP 8740 |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | CADMIUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| STYLE DESIGNATOR | STEPPED |
| SHANK DIAMETER | 0.307 INCHES MINIMUM AND |
| 0.311 INCHES MAXIMUM |
| OVERALL LENGTH | 2.740 INCHES MINIMUM AND |
| 2.760 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF NUT THREAD |
| UNC STUD THREAD |
| NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD |
| 0.438 INCHES STUD THREAD |
| THREAD QUANTITY PER INCH | 24 NUT THREAD |
| 14 STUD THREAD |
| THREAD PITCH DIAMETERS | 0.3992 TO 0.4007 INCHES STUD THREAD |
| THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| RIGHT-HAND STUD THREAD |
| THREAD LENGTH | 0.678 INCHES MINIMUM AND |
| 0.698 INCHES MAXIMUM NUT THREAD |
| 0.865 INCHES MINIMUM AND |
| 0.885 INCHES MAXIMUM STUD THREAD |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND |
| 32.0 ROCKWELL C MAXIMUM |
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.130 INCHES MINIMUM AND |
| 0.150 INCHES MAXIMUM FIRST HOLE |
| COTTER PIN HOLE DIAMETER | 0.094 INCHES MINIMUM AND |
| 0.101 INCHES MAXIMUM FIRST HOLE |
| SURFACE FINISH | 63.0 MICROINCHES SHANK |