|
|
|
National Stock Number:
5307-00-105-3297
Federal Supply Class:
5307
National Item Identification Number:
001053297
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING | | SURFACE TREATMENT | PASSIVATE OVERALL | | OVERALL LENGTH | 6.938 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | 2A STUD THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | 24 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.625 INCHES MINIMUM NUT THREAD | | 0.625 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | MAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATION AND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTEDFIELD |
|
|