|
|
|
National Stock Number:
5307-00-105-3314
Federal Supply Class:
5307
National Item Identification Number:
001053314
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
|
Techincal Specification:
| MATERIAL | STEEL COMP 316 | | OVERALL LENGTH | 6.375 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | 0.500 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | 2A STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | 13 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.875 INCHES NOMINAL NUT THREAD | | 0.875 INCHES NOMINAL STUD THREAD | | SPECIAL FEATURES | STUD END MACHINED TO 3/8 IN. DIA AND EXTENDING 7/16 IN. TOBEGINNING OF STUD THREAD | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATIONAND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTEDFIELD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 64104 | | DESIGN CONTROL REFERENCE | 701087 |
|
|