|
|
|
National Stock Number:
5307-00-105-3319
Federal Supply Class:
5307
National Item Identification Number:
001053319
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 701081A | 64104 | DRESSER, LLC | | 701081AVM | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
|
Techincal Specification:
| MATERIAL | STEEL COMP 316 | | SURFACE TREATMENT | PASSIVATE OVERALL | | OVERALL LENGTH | 2.750 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.250 INCHES MINIMUM NUT THREAD | | 1.250 INCHES MINIMUM STUD THREAD | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATION ANDNOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTED FIELD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 64104 | | DESIGN CONTROL REFERENCE | 701081A |
|
|