|
|
|
National Stock Number:
5307-00-210-6603
Federal Supply Class:
5307
National Item Identification Number:
002106603
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 3992-1058-1 | 04614 | TEXTRON SYSTEMS CORPORATION | | 9282881-01 | 98752 | WARNER ROBINS AIR LOGISTICS CENTER |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-T-570,CLASS 1 OR 2 FED SPEC SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 9.690 INCHES MINIMUM AND | | 9.810 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | 2A STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 24 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 2.880 INCHES MINIMUM AND | | 3.120 INCHES MAXIMUM NUT THREAD | | 1.000 INCHES MINIMUM AND | | 1.250 INCHES MAXIMUM STUD THREAD | | SPECIAL FEATURES | TECH ORDER 11W1-33-7-2 FIG 6 | | HARDNESS RATING | 61.0 ROCKWELL C MINIMUM AND | | 62.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL |
|