|
|
|
National Stock Number:
5307-00-224-2878
Federal Supply Class:
5307
National Item Identification Number:
002242878
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 65C35173-7 | 18894 | AIR ARMAMENT CENTER/ EN |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1213 | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OR | | QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CL 1 FED SPEC ALL TREATMENT RESPONSES OVERALL | | OVERALL LENGTH | 6.438 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 24 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.125 INCHES MINIMUM AND | | 1.375 INCHES MAXIMUM NUT THREAD | | 1.125 INCHES MINIMUM AND | | 1.375 INCHES MAXIMUM STUD THREAD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 18894 | | DESIGN CONTROL REFERENCE | 65C35173-7 |
|
|