|
|
|
National Stock Number:
5307-00-231-1893
Federal Supply Class:
5307
National Item Identification Number:
002311893
Description:
STUD,LOCKED IN
Detail:
A headless fastener externally threaded on both ends with each threaded portion of one but not necessarily the same nominal diameter. It is designed to be locked in place by either a RING, LOCK, SERRATED or a RING, LOCK, KEYED.
|
Manufacturer Information:
| MS51989C105&12 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS51989E105-12 | 0U583 | SAE INTERNATIONAL | | MS51989E105-12 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS51989E105-12 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5734 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | LOCKED IN | | DISTANCE FROM SERRATED PORTION TO NUT END | 0.735 INCHES MINIMUM AND | | 0.765 INCHES MAXIMUM | | DISTANCE FROM SERRATED PORTION TO STUD END | 0.545 INCHES MINIMUM AND | | 0.575 INCHES MAXIMUM | | DISTANCE FROM SERRATED PORTION TO END OF STUD THREAD | 0.140 INCHES MINIMUM AND | | 0.200 INCHES MAXIMUM | | OVERALL LENGTH | 1.280 INCHES MINIMUM AND | | 1.340 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 18 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2778 TO 0.2795 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.485 INCHES MINIMUM AND | | 0.515 INCHES MAXIMUM NUT THREAD | | 0.375 INCHES MINIMUM AND | | 0.405 INCHES MAXIMUM STUD THREAD | | LOCKING FEATURE | RING, LOCK SERRATED | | SURFACE FINISH | 32.0 MICROINCHES NUT THD | | SERRATION QUANTITY | 17 | | SERRATION INCLUDED ANGLE | 86.0 DEGREES NOMINAL |
|
|