|
|
|
National Stock Number:
5307-00-246-0994
Federal Supply Class:
5307
National Item Identification Number:
002460994
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| CH140-14-313 | K0377 | GOODRICH ACTUATION SYSTEMS LIMITED |
|
Techincal Specification:
| SURFACE TREATMENT | CADMIUM AND | | NICKEL OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE2 FED SPEC 1ST TREATMENT RESPONSE AND | | AMS 2403 ASSN STD 2ND TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 0.900 INCHES MINIMUM AND | | 0.920 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | 0.190 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | 32 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.370 INCHES MINIMUM AND | | 0.390 INCHES MAXIMUM NUT THREAD | | 0.250 INCHES MINIMUM AND | | 0.270 INCHES MAXIMUM STUD THREAD | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | K0377 | | DESIGN CONTROL REFERENCE | CH140-14-313 |
|
|