| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE |
| STYLE DESIGNATOR | SHOULDERED |
| SHOULDER DIAMETER | 0.8725 INCHES MINIMUM AND |
| 0.8738 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.845 INCHES NOMINAL |
| NUT END SHANK LENGTH | 0.730 INCHES NOMINAL |
| STUD END SHANK LENGTH | 0.795 INCHES NOMINAL |
| STUD END SHANK DIAMETER | 0.5294 INCHES MINIMUM AND |
| 0.5305 INCHES MAXIMUM |
| NUT END SHANK DIAMETER | 0.5294 INCHES MINIMUM AND |
| 0.5305 INCHES MAXIMUM |
| OVERALL LENGTH | 3.355 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF NUT THREAD |
| UNF STUD THREAD |
| NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD |
| 0.375 INCHES STUD THREAD |
| THREAD CLASS | 3A NUT THREAD |
| 3A STUD THREAD |
| THREAD QUANTITY PER INCH | 24 NUT THREAD |
| 24 STUD THREAD |
| THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| RIGHT-HAND STUD THREAD |
| THREAD LENGTH | 0.500 INCHES NOMINAL NUT THREAD |
| 0.485 INCHES NOMINAL STUD THREAD |
| SPECIAL FEATURES | SHOULDER IS ECCENTRIC TO BODY |
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.130 INCHES NOMINAL FIRST HOLE |
| 0.130 INCHES NOMINAL SECOND HOLE |
| COTTER PIN HOLE DIAMETER | 0.109 INCHES MINIMUM AND |
| 0.114 INCHES MAXIMUM FIRST HOLE |
| 0.109 INCHES MINIMUM AND |
| 0.114 INCHES MAXIMUM SECOND HOLE |
| SURFACE FINISH | 32.0 MICROINCHES BODY |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 98897 |
| DESIGN CONTROL REFERENCE | 4J13049-101A |