|
|
|
National Stock Number:
5307-00-254-3560
Federal Supply Class:
5307
National Item Identification Number:
002543560
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
|
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.093 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.250 INCHES NOMINAL FIRST HOLE | | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.000 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 5A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.562 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 1.000 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD |
|
|