|
|
|
National Stock Number:
5307-00-292-5844
Federal Supply Class:
5307
National Item Identification Number:
002925844
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 112604 | 97907 | TEREX CORP | | 1F12 | 11083 | CATERPILLAR INC | | 203000 | 06853 | BENDIX COMMERCIAL VEHICLE SYSTEMS LLC | | 9112604 | 24617 | GENERAL MOTORS CORP | | 9112604 | 97907 | TEREX CORP | | BW203000 | 97907 | TEREX CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1213 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 2.688 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 18 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2780 TO 0.2800 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.562 INCHES MINIMUM NUT THREAD | | 0.500 INCHES MINIMUM STUD THREAD |
|
|