|
|
|
National Stock Number:
5307-00-297-2586
Federal Supply Class:
5307
National Item Identification Number:
002972586
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 9039124-2P003 | 24617 | GENERAL MOTORS CORP | | 9039124-2P003 | 73342 | ALLISON TRANSMISSION INC | | 9039124-P003 | 24617 | GENERAL MOTORS CORP |
|
Techincal Specification:
| MATERIAL | STEEL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 1.781 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 16 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3405 TO 0.3429 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.891 INCHES NOMINAL NUT THREAD | | 0.766 INCHES NOMINAL STUD THREAD | | SPECIAL FEATURES | BOTH ENDS DRILLED 0.109 IN. DIA,0.047 IN. DEEP | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73342 | | DESIGN CONTROL REFERENCE | 9039124-2P003 |
|
|