|
|
|
National Stock Number:
5307-00-307-2333
Federal Supply Class:
5307
National Item Identification Number:
003072333
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 27636-10 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE FINISH | 32.0 MICROINCHES NUT THD | | SURFACE FINISH | 32.0 MICROINCHES STUD THD | | SURFACE FINISH | 63.0 MICROINCHES SHANK | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD LENGTH | 0.688 INCHES MINIMUM AND 0.788 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.689 INCHES MINIMUM AND 0.760 INCHES MAXIMUM NUT THREAD | | THREAD PITCH DIAMETERS | +0.2248 TO 0.2263 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD |
|
|