|
|
|
National Stock Number:
5307-00-308-2992
Federal Supply Class:
5307
National Item Identification Number:
003082992
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 414B365-2 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | 850117B FSCM 59650 MFR REF SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 1.920 INCHES MINIMUM AND 1.960 INCHES MAXIMUM | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SPECIAL FEATURES | LOK THD ON 60 PCT OF STUD END AND 0.062 IN. WIDE 0.253 IN. DIA THD RELIEF BETWEEN THDS AND 0.247 IN. DIA 0.060 IN. LG PILOT LOCATED ON STUD END | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD LENGTH | 0.680 INCHES MINIMUM AND 0.720 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.680 INCHES MINIMUM AND 0.720 INCHES MAXIMUM STUD THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|
|