|
|
|
National Stock Number:
5307-00-317-3037
Federal Supply Class:
5307
National Item Identification Number:
003173037
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 13XX4266 | 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC | | 25734 | 54123 | COLSON CORP THE | | 863949 | 12603 | CLARK EQUIPMENT CO | | 28536 | 78640 | MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC | | 863949 | 89749 | CLARK MATERIAL HANDLING COMPANY |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8640 | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | OVERALL LENGTH | 2.125 INCHES NOMINAL | | SURFACE TREATMENT | CADMIUM OVERALL OR ZINC OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.562 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.938 INCHES MINIMUM NUT THREAD | | THREAD PITCH DIAMETERS | +0.3368/+0.3388 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|