|
|
|
National Stock Number:
5307-00-346-5354
Federal Supply Class:
5307
National Item Identification Number:
003465354
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 4020057P3 | 00088 | ROYAL OAK GAGE INC | | 4020057P3 | 02991 | THOMPSON AEROSPACE, LLC | | 4020057P3 | 77445 | RTX CORPORATION | | 4020057P3 | 80539 | SPS TECHNOLOGIES, LLC | | 5307PL0896246 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| OVERALL LENGTH | 1.528 INCHES MINIMUM AND 1.548 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 7481 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.600 INCHES MINIMUM AND 0.670 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.718 INCHES MINIMUM AND 0.848 INCHES MAXIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.1974 TO 0.2500 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNJF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD |
|
|