|
|
|
National Stock Number:
5307-00-358-9583
Federal Supply Class:
5307
National Item Identification Number:
003589583
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 78135-526 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC |
|
Techincal Specification:
| HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.620 INCHES MINIMUM AND 0.730 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.680 INCHES MINIMUM AND 0.760 INCHES MAXIMUM NUT THREAD | | THREAD SERIES DESIGNATOR | UNJC STUD THREAD | | THREAD SERIES DESIGNATOR | UNJF NUT THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|
|