|
|
|
National Stock Number:
5307-00-359-1250
Federal Supply Class:
5307
National Item Identification Number:
003591250
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 38348 | 54123 | COLSON CORP THE | | 4X1103 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | 4X1103 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | 4X1103 | 79780 | MERITOR HEAVY VEHICLE SYSTEMS LLC OFF HIGHWAY PRODUCTS AND SUPPLY DIV HEAVY VEHICLES COMPONENTS OPNS | | MIL-DTL-1222,TY I, ST C | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.031 INCHES MINIMUM AND 2.093 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | STM A193 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 4142 OR STEEL COMP 4145 | | NOMINAL THREAD SIZE | 0.438 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.438 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.562 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.719 INCHES MINIMUM NUT THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD QUANTITY PER INCH | 14 STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
|
|