|
|
|
National Stock Number:
5307-00-366-3559
Federal Supply Class:
5307
National Item Identification Number:
003663559
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 8028709 | 24617 | GENERAL MOTORS CORP | | 8028709 | 72915 | GENERAL MOTORS CORP ELECTRO-MOTIVE DIV |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.125 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.188 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 2.000 INCHES NOMINAL | | MATERIAL | STEEL COMP 1120 | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES STUD THREAD | | SPECIAL FEATURES | HALF DOG STYLE POINT ON STUD THREAD END 0.06212222222222222222 IN. LG. BY 0.375 IN. DIA. NUT THREAD END SHAMFERED 0.062 IN. BY 45.0 DEG. DRILLED END CHAMFERED 0.062 IN.BY 45.0 DEG. | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.562 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.938 INCHES MINIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.4536 TO 0.4565 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 13 STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD |
|
|