|
|
|
National Stock Number:
5307-00-371-5335
Federal Supply Class:
5307
National Item Identification Number:
003715335
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 05152149 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 5158668 | 24617 | GENERAL MOTORS CORP | | 5158668 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.562 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.250 INCHES NOMINAL FIRST HOLE | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 5.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 3135 | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES STUD THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.000 INCHES NOMINAL STUD THREAD | | THREAD LENGTH | 1.500 INCHES NOMINAL NUT THREAD | | THREAD PITCH DIAMETERS | +0.5690 TO 0.5705 INCHES NUT THREAD | | THREAD SERIES DESIGNATOR | UNS NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 11 NUT THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD |
|