|
|
|
National Stock Number:
5307-00-384-8477
Federal Supply Class:
5307
National Item Identification Number:
003848477
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 5996 | 78640 | MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC | | 853334 | 12603 | CLARK EQUIPMENT CO | | X19004C | 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC | | 98X19004C | 16662 | LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE | | 98X19004C | 66654 | TVH PARTS CO. | | 853334 | 89749 | CLARK MATERIAL HANDLING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8640 | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 1.500 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | 16 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3368 TO 0.3388 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.750 INCHES MINIMUM NUT THREAD | | 0.500 INCHES MINIMUM STUD THREAD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 14351 | | DESIGN CONTROL REFERENCE | X19004C |
|