|
|
|
National Stock Number:
5307-00-413-8110
Federal Supply Class:
5307
National Item Identification Number:
004138110
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 151279 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC STUD THREAD | | SURFACE TREATMENT | NICKEL OVERALL | | NOMINAL THREAD SIZE | 0.164 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.164 INCHES STUD THREAD | | OVERALL LENGTH | 2.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1020 | | SPECIAL FEATURES | 0.070 IN. BY 0.125 IN.DEEP HOLE DRILLED INTO STUD END | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 5A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.375 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.500 INCHES MAXIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | THREAD QUANTITY PER INCH | 32 STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD |
|