|
|
|
National Stock Number:
5307-00-466-4742
Federal Supply Class:
5307
National Item Identification Number:
004664742
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 13XX4212 | 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC | | 864094 | 12603 | CLARK EQUIPMENT CO | | X4212 | 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC | | 864094 | 89749 | CLARK MATERIAL HANDLING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8640 | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OR | | ZINC OVERALL | | OVERALL LENGTH | 3.125 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | 16 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3378 TO 0.3398 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.875 INCHES MINIMUM NUT THREAD | | 0.562 INCHES MINIMUM STUD THREAD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 14351 | | DESIGN CONTROL REFERENCE | 13XX4212 |
|