|
|
|
National Stock Number:
5307-00-468-9915
Federal Supply Class:
5307
National Item Identification Number:
004689915
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 150-415GPC103 | 27235 | HARDIE-TYNES CO., INC. | | 3315345REVAPC103 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | S150-415GREVAPC103 | 27235 | HARDIE-TYNES CO., INC. | | 390004PC103 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,ALLOY NO. 4 MIL SPEC SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 9.312 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | 0.500 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 5A STUD THREAD | | THREAD QUANTITY PER INCH | 13 NUT THREAD | | 13 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.250 INCHES MINIMUM NUT THREAD | | 1.000 INCHES MINIMUM STUD THREAD | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY NUT END THRAD LENGTH AND MODIFIED BY STUD END THREAD LENGTH |
|
|