|
|
|
National Stock Number:
5307-00-471-1858
Federal Supply Class:
5307
National Item Identification Number:
004711858
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 96734P009 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 416F | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 1.030 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | 2A STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 20 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2318 TO 0.2333 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.340 INCHES MINIMUM NUT THREAD | | 0.310 INCHES MINIMUM STUD THREAD | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 34.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 11599 | | DESIGN CONTROL REFERENCE | 96734P009 |
|
|