|
|
|
National Stock Number:
5307-00-474-2745
Federal Supply Class:
5307
National Item Identification Number:
004742745
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 99-508 | 45934 | ONTIC ENGINEERING & MANUFACTURING, INC | | 99-508 | 56705 | DONALLCO INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4037 | | OVERALL LENGTH | 1.969 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 16 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3375 TO 0.3399 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.875 INCHES MINIMUM NUT THREAD | | 0.688 INCHES MINIMUM STUD THREAD | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.125 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 45934 | | DESIGN CONTROL REFERENCE | 99-508 |
|
|