|
|
|
National Stock Number:
5307-00-515-6697
Federal Supply Class:
5307
National Item Identification Number:
005156697
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 2030J9 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8735 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 1.360 INCHES MINIMUM AND | | 1.400 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 18 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2944 TO 0.2954 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.500 INCHES MINIMUM NUT THREAD | | 0.680 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | STUD END DRILLED FOR COTTER PIN,0.110 IN. DISTANCE FROM COTTER PIN HOLE CENTERLINE TO STUD END,0.065 IN. MIN TO 0.072 IN. MAX COTTER PIN HOLE DIAMETER | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.110 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 0AHP5 | | DESIGN CONTROL REFERENCE | 2030J9 |
|
|