|
|
|
National Stock Number:
5307-00-515-8462
Federal Supply Class:
5307
National Item Identification Number:
005158462
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 2028S32 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8740 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049,COND C MIL SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 2.740 INCHES MINIMUM AND | | 2.780 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 20 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2295 TO 0.2305 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.440 INCHES MINIMUM NUT THREAD | | 0.560 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | ROLLED THREADS BOTH ENDS | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.110 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM FIRST HOLE |
|
|