|
|
|
National Stock Number:
5307-00-582-8826
Federal Supply Class:
5307
National Item Identification Number:
005828826
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 355949P003 | 77445 | RTX CORPORATION | | 355949P3 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1137 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5024 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 1.240 INCHES MINIMUM AND | | 1.260 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 20 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2245 TO 0.2260 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.5994 INCHES MINIMUM NUT THREAD | | 0.375 INCHES MINIMUM STUD THREAD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77445 | | DESIGN CONTROL REFERENCE | 355949P3 |
|
|