|
|
|
National Stock Number:
5307-00-603-1020
Federal Supply Class:
5307
National Item Identification Number:
006031020
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 18529P008 | 00198 | PRATT & WHITNEY CANADA CORP | | 18529P008 | 77445 | RTX CORPORATION | | 18529P8 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.521 INCHES MINIMUM AND 1.541 INCHES MAXIMUM | | MATERIAL | STEEL COMP 8740 OR STEEL COMP 8735 | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.490 INCHES MINIMUM AND 0.575 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.865 INCHES MINIMUM AND 0.975 INCHES MAXIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.2883 TO 0.2909 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|
|