|
|
|
National Stock Number:
5307-00-616-2902
Federal Supply Class:
5307
National Item Identification Number:
006162902
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 99-1336-01 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.125 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 2.688 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SPECIAL FEATURES | STUD CADMIUM PLATED EXCEPT IN AREAOF NS THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD LENGTH | 0.688 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.750 INCHES MAXIMUM NUT THREAD | | THREAD PITCH DIAMETERS | +0.3405 TO 0.3429 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|
|