|
|
|
National Stock Number:
5307-00-619-5099
Federal Supply Class:
5307
National Item Identification Number:
006195099
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 77913P-004 | 77445 | RTX CORPORATION | | 77913P004 | 00198 | PRATT & WHITNEY CANADA CORP | | 77913P004 | 77445 | RTX CORPORATION | | 77913P4 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8740 | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD LENGTH | 0.490 INCHES MINIMUM AND 0.590 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.740 INCHES MINIMUM AND 0.820 INCHES MAXIMUM NUT THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD |
|
|