|
|
|
National Stock Number:
5307-00-619-5938
Federal Supply Class:
5307
National Item Identification Number:
006195938
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 6716581P003 | 24617 | GENERAL MOTORS CORP | | 6716581P003 | 63005 | ROLLS-ROYCE CORPORATION | | 6716581P3 | 24617 | GENERAL MOTORS CORP | | 6716581P3 | 63005 | ROLLS-ROYCE CORPORATION | | 6716581P3 | 73342 | ALLISON TRANSMISSION INC | | 6716581P003 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.125 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD LENGTH | 0.375 INCHES NOMINAL STUD THREAD | | THREAD LENGTH | 0.562 INCHES NOMINAL NUT THREAD | | THREAD PITCH DIAMETERS | +0.2225 TO 0.2238 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD |
|