|
|
|
National Stock Number:
5307-00-630-9168
Federal Supply Class:
5307
National Item Identification Number:
006309168
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 12089 | 00198 | PRATT & WHITNEY CANADA CORP | | 186211 | 06840 | BENDIX CORP THE | | 186211 | 06848 | HONEYWELL INTERNATIONAL INC |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SPECIAL FEATURES | STUD END CHAMFERED 45.0 DEG BY 0.030 IN. MIN 0.060 IN.MAX DEEP,NUT END CHAMFERED 45.0 DEG BY 0.020 IN.MIN 0.050 IN.MAX DEEP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD LENGTH | 0.427 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.490 INCHES MINIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.2211 TO 0.2235 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD |
|
|