|
|
|
National Stock Number:
5307-00-725-3535
Federal Supply Class:
5307
National Item Identification Number:
007253535
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 329792P9 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | OVERALL LENGTH | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6304 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 601 | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.688 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.562 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD PITCH DIAMETERS | +0.2308 TO 0.2323 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | SURFACE TREATMENT | NICKEL OVERALL AND CADMIUM OVERALL |
|
|