|
|
|
National Stock Number:
5307-00-729-9894
Federal Supply Class:
5307
National Item Identification Number:
007299894
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 329792P3 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 601 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6304 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | NICKEL AND | | CADMIUM OVERALL | | OVERALL LENGTH | 1.740 INCHES MINIMUM AND | | 1.760 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNS NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 20 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2213 TO 0.2238 INCHES NUT THREAD | | 0.2248 TO 0.2263 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.562 INCHES MINIMUM NUT THREAD | | 0.688 INCHES MINIMUM STUD THREAD | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77445 | | DESIGN CONTROL REFERENCE | 329792P3 |
|
|