|
|
|
National Stock Number:
5307-00-737-4098
Federal Supply Class:
5307
National Item Identification Number:
007374098
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 201479H | 02978 | RENK AMERICA LLC | | 201479H11 | 02978 | RENK AMERICA LLC | | 7374098 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| MATERIAL | STEEL COMP 3140 | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 1.740 INCHES MINIMUM AND | | 1.780 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 16 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.600 INCHES MINIMUM NUT THREAD | | 0.800 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | THD STUD END 0.003 IN.OVERSIZE | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.140 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.096 INCHES MINIMUM AND | | 0.103 INCHES MAXIMUM FIRST HOLE |
|
|