|
|
|
National Stock Number:
5307-00-737-6213
Federal Supply Class:
5307
National Item Identification Number:
007376213
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 7376213 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | CS-2300-0001 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8640 | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 2.250 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | 0.500 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 13 NUT THREAD | | 13 STUD THREAD | | THREAD PITCH DIAMETERS | 0.4539 TO 0.4559 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.062 INCHES MAXIMUM NUT THREAD | | 0.750 INCHES MAXIMUM STUD THREAD | | HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM |
|