|
|
|
National Stock Number:
5307-00-737-6967
Federal Supply Class:
5307
National Item Identification Number:
007376967
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 385934 | 06848 | HONEYWELL INTERNATIONAL INC | | 385934 | 72850 | PUROLATOR PRODUCTS CO DIV MOTOR COMPONENTS LLC | | 385934 | 90005 | PUROLATOR FACET INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 3140 OR | | STEEL COMP 4140 OR | | STEEL COMP 8640 OR | | STEEL COMP 4340 | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 1.406 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 18 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2844 TO 0.2864 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.750 INCHES MINIMUM NUT THREAD | | 0.469 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | 0.031 IN. BY 40.0 DEG MIN TO 50.0 DEG MAX CHAMFER AT BOTH ENDS | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND | | 34.0 ROCKWELL C MAXIMUM |
|