|
|
|
National Stock Number:
5307-00-737-8743
Federal Supply Class:
5307
National Item Identification Number:
007378743
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 5307007378743 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5307007378743 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7378743 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 6765923 | 24617 | GENERAL MOTORS CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8640 OR | | STEEL COMP 8740 OR | | STEEL COMP 4140 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC ALL MATERIAL RESPONSES | | OVERALL LENGTH | 2.219 INCHES MINIMUM AND | | 2.281 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.500 INCHES NUT THREAD | | 0.500 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | 13 STUD THREAD | | THREAD PITCH DIAMETERS | 0.4561 TO 0.4577 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.875 INCHES MINIMUM NUT THREAD | | 0.938 INCHES MINIMUM STUD THREAD | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.172 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.104 INCHES MINIMUM AND | | 0.114 INCHES MAXIMUM FIRST HOLE |
|